Observation of field induced anomalous quantum criticality in Ce0.6Y0.4NiGe2 compound

We report the results of our investigation of magnetization and heat capacity on a series of compounds Ce${}_{1?x}$Y_xNiGe₂ ($x=0.1,0.2\text{ and }0.4$) under the influence of external magnetic field. Our studies of the thermodynamic quantity $?\mathrm{d}M/\mathrm{d}T$ on these compounds indicate that magnetic frustration persists in Ce_0.9Y_0.1NiGe₂, as also reported for the parent compound CeNiGe₂. The weak signature of this frustration is also noted in Ce_0.8Y_0.2NiGe₂, whereas, it is suppressed in Ce_0.6Y_0.4NiGe₂. Heat capacity studies on Ce_0.9Y_0.1NiGe₂ and Ce_0.8Y_0.2NiGe₂ indicate the presence of a new magnetic anomaly at high field which indicates that quantum criticality is absent in these compounds. However, for Ce_0.6Y_0.4NiGe₂ such an anomaly is not noted. For this later compound, the magnetic field (H) and temperature (T) dependence of heat capacity and magnetization obey $H/T$ scaling above critical fields. However, the obtained scaling critical parameter (δ) is 1.6, which is away from mean field value of 3. This deviation suggests the presence of unusual fluctuations and anomalous quantum criticality in these compounds. This unusual fluctuation may arise from disorderness induced by Y-substitution.     

Inducement of ferromagnetic–metallic phase and magnetoresistance behavior in charged ordered monovalent-doped Pr0.75Na0.25MnO3 manganite by Ni substitution

In this communication, the study on the effect of Ni²⁺ substitution on structural, magnetic and electrical transport properties were performed in Pr_0.75Na_0.25Mn_1-xNi_xO₃ (x = 0–0.10) ceramics synthesized using conventional solid-state method. X-ray diffraction patterns showed that all samples were present in single phase and crystallized in orthorhombic structure with Pnma space group. Rietveld refinement analysis revealed unit cell volume slight increase with increase Ni concentration, thereby indicating partial substitution of Ni²⁺ at Mn³⁺. The presence majority of Ni²⁺ states in the compound were confirmed by X-ray photoelectron spectrum. Tolerance factor calculation suggested that Ni substitution exerted no strong effect on structural distortion. For un-doped sample (x = 0), AC susceptibility (χ′) against temperature (T) curve showed paramagnetic (PM)–antiferromagnetic(AFM) behavior at Neel temperature (T_N) of approximately 170 K. Furthermore, resistivity (ρ) against temperature (T) curve showed an insulating behavior for the whole measured temperature range. The χ′ against T curve of x = 0 sample showed broad peak at approximately 218 K which was attributed to the onset of charge ordered (CO) state. No such broad peak was observed in Ni-substituted samples which indicated the weakening of CO state. Moreover, χ′ measurements exhibited successful inducement of PM–FM transition with Curie temperature (T_C), decreasing from 132 K (x = 0.02) to 92 K (x = 0.08). Electrical resistivity measurement on samples (x = 0.02–0.08) displayed inducement of metal–insulator transition, where transition temperature (T_MI) decreased and resistivity increased, with x before re-entrant insulating behavior at x = 0.10. Notably, upturn resistivity was observed below 40 K for x = 0.06 and 0.08 samples. The suppression of CO state and inducement of ferromagnetic-metallic (FMM) state beginning from x = 0.02 sample was attributed to the reduced degree of Jahn–Teller distortion and Coulomb interaction among Mn ions, as well as the presence of ferromagnetic superexchange (FM SE) interaction among Ni²⁺–O–Mn⁴⁺ which improved the alignment charge carrier spins and induced the double-exchange (DE) interaction among Mn³⁺–O–Mn⁴⁺. The decrease in T_C and T_MI with increased x may be due to the enhanced AFM SE interactions of Mn³⁺–O–Mn³⁺, Mn⁴⁺–O–Mn⁴⁺ and Ni²⁺–O–Ni²⁺ which decreased the FM SE interaction of Ni²⁺–O–Mn⁴⁺. Consequently, the effective DE interaction was decreased. In addition, the decreased metallic behavior and re-entrant insulating behavior for x = 0.10 sample was due to the strong AFM interaction between Ni²⁺ ions which consequently contributed to the suppression of FM SE and DE interactions. The observed upturn resistivity below 40 K for x = 0.06 and 0.08 samples was attributed to the Kondo-like effect which resulted from the interaction between itinerant conduction electron spin and localized spin impurity.     

Synthesis of heterobiaryls via Suzuki‐Miyaura coupling reaction of potassium aryltrifluoroborates with heteroaryl halides in aqueous systems

A variety of heterobiaryl compounds have been synthesized by the Suzuki‐Miyaura coupling reactions of heteroaryl halides with potassium aryltrifluoroborates. Pd (OAc)₂ was found to be highly efficient for the Suzuki‐Miyaura coupling reactions of various heteroaryl halides with potassium aryltrifluoroborates in aqueous systems, delivering the corresponding heterobiaryl compounds in good to excellent yields.     

Novel palladium nanoparticles supported on β‐cyclodextrin@graphene oxide as magnetically recyclable catalyst for Suzuki–Miyaura cross‐coupling reaction with two different approaches in bio‐based solvents

A novel nanocatalyst was designed and prepared. Initially, the surface of magnetic graphene oxide (M‐GO) was modified using thionyl chloride, tris(hydroxymethyl)aminomethane and acryloyl chloride as linkers which provide reactive C═C bonds for the polymerization of vinylic monomers. Separately, β‐cyclodextrin (β‐CD) was treated with acryloyl chloride to provide a modified β‐CD. Then, in the presence methylenebisacrylamide as a cross‐linker, monomers of modified β‐CD and acrylamide were polymerized on the surface of the pre‐prepared M‐GO. Finally, palladium acetate and sodium borohydride were added to this composite to afford supported palladium nanoparticles. This fabricated nanocomposite was fully characterized using various techniques. The efficiency of this easily separable and reusable heterogeneous catalyst was successfully examined in Suzuki–Miyaura cross‐coupling reactions of aryl halides and boronic acid as well as in modified Suzuki–Miyaura cross‐coupling reactions of N‐acylsuccinimides and boronic acid in green media. The results showed that the nanocatalyst was efficient in coupling reactions for direct formation of the corresponding biphenyl as well as benzophenone derivatives in green media based on bio‐based solvents. In addition, the nanocatalyst was easily separable, using an external magnet, and could be reused several times without significant loss of activity under the optimum reaction conditions.     

Enhanced Performance of Organic/Inorganic Hybrid Nanomaterials bearing Impregnated [PdL2] Complexes as Counter‐Electrode Catalyst for Dye‐Sensitized Solar Cells

N‐coordinate Pd²⁺ complexes [PdL₂] (L: N‐N‐quinoline‐8‐yl‐R‐benzenesulfonamides) ( 6–10 ) and [PdL₂] complexes assembled on multi‐wall carbon nanotubes (MWCNTs) hybrid nanomaterials were fabricated and characterized by various techniques. The [PdL₂] impregnated MWCNTs materials ( 11–15 ) were applied as a counter electrode (CE) catalyst for triiodide to iodide reduction reaction in the dye‐sensitized solar cells (DSSC) and investigated electro‐catalytic activities. The MWCNTs‐supported [PdL₂] CEs ( 11–15 ) are exhibits as Pt‐free CE with good power conversion efficiencies (PCEs), and compared to platinum and bare MWCNTs CEs and the PCE of bare MWCNTs was clearly improved by means of [PdL₂] complexes ( 6–10 ). The DSSCs based on the hybrid counter electrodes (CEs) ( 11–15 ) and bare MWCNTs are indicated a relative efficiency ( ? _rel ) of 64.27%, 54.07%, 53.75%, 51.52% 44.82% and 27.27% concerning a Pt CE control device set at 100%. The report emphasizes that [PdL₂] impregnated MWCNTs type counter electrodes (CEs) ( 11–15 ) are promising as effectively catalyst in working device design, particularly taking into account the eco‐friendly approach of the hybrids.     

New lower bounds on the radius of spatial analyticity for the KdV equation

The radius of spatial analyticity for solutions of the KdV equation is studied. It is shown that the analyticity radius does not decay faster than $t^{?1/4}$ as time t goes to infinity. This improves the works of Selberg and da Silva (2017) [30] and Tesfahun (2017) [34]. Our strategy mainly relies on a higher order almost conservation law in Gevrey spaces, which is inspired by the I-method.     

The h-SbxWO3+2x Oxygen Excess Antimony Tungsten Bronze

We describe the previously unreported oxygen excess hexagonal antimony tungsten bronze with composition Sb_0.5W₃O₁₀, in the following denoted as h-Sb_xWO_3+2x with x=0.167, to demonstrate its analogy to classical A_xWO₃ tungsten bronzes. This compound forms in a relatively narrow temperature range between 580 °C<T<620 °C. It was obtained as a dark-blue polycrystalline powder, and as thin, needle-shaped, blue single crystals. h-Sb_xWO_3+2x crystallizes in the hexagonal space group P6/mmm with the cell parameters a=7.4369(4) Å and c=3.7800(2) Å. The antimony and excess oxygen occupy the hexagonal channels within the network of corner-sharing WO₆ octahedra. h-Sb_xWO_3+2x has a resistivity of ρ_{300 K}≈1.28 mΩ cm at room temperature, with little if any temperature-dependence on cooling. DFT calculations on a simplified model for this compound find a metallic-like electronic structure with the Fermi level falling within rather flat bands, especially around the Γ point.     

Synthesis of Highly Functionalized N,N-Diarylamides by an Anodic C,N-Coupling Reaction

We report an innovative, sustainable and straightforward protocol for the synthesis of N,N-diarylamides equipped with nonprotected hydroxyl groups by using electrosynthesis. The concept allows the application of various substrates furnishing diarylamides with yields up to 57 % within a single and direct electrolytic protocol. The method is thereby easy to conduct in an undivided cell with constant current conditions offering a versatile and short-cut alternative to conventional pathways.     

Structure and Mechanical Stability of Epoxy Modified Polyurethane Foam Under Heat and Stress

A series of phenolic epoxy resin (PEP) modified polyurethane foams (PUF) were prepared via an in-situ polymerization, one step process. It was found that the epoxy modified PUF foam exhibited a perforated network structure with larger cell size, higher open cell porosity and enhanced ovality compared with pure PUF. With increasing content of PEP, the tensile strength, elongation at break and low temperature modulus of PUF decreased. A single T_g was observed for PEP modified PUF, indicating that the two component phases of the polyurethane-epoxy were miscible. With increasing PEP content, the T_g of PUF shifted slightly to higher temperature, tan δ_max dropped to lower values, and the retention value of the storage modulus at ?20 and ?10?°C increased. For pure PUF, the cell walls degraded and the structure became disordered after aging under heat and stress, while for PUF/20wt%PEP, the degradation degree was obviously reduced, and an orientation of the cells along the stress direction and a density increase was observed. During aging at 200?°C, the retention of the mechanical properties of PUF/20wt% PEP was much higher than that of pure PUF, and it showed superior stability under heat and stress, attributed to incorporation of the thermally resistant oxazolidone rings and benzene rings in the PU backbones, the highly cross-linked networks of the polyurethane-epoxy systems and the obvious orientation of the cells under stress.     

Porous MoO3@SiC hallow nanosphere composite as an efficient oxidative desulfurization catalyst

A novel N‐doped MoO ₃ @SiC hollow nanosphere has been synthesized through two steps. Due to the first step, N‐doped MoO₂@C nanosphere was synthesized using the hydrothermal method and in the second step, Si‐C bonds were formed through the low‐temperature magnesiothermic method and MoO ₃ @SiC hollow nanosphere was produced. The prepared nanostructures were identified by various techniques such as IR, XRD, XPS, BET/BJH, SEM/EDS, and Raman spectroscopy. Results show that converting of C to SiC increase the surface area from 17 to 241 m²/g with remarkably decrease in pore diameter. Also, molybdenum is present in the form of MoO₂ in carbon catalyst while during magnesiothermic process, it transfers to MoO₃ form in the SiC catalyst. The synthesized products were employed as catalysts in oxidative desulfurization of model fuel. The results displayed that MoO ₃ @SiC hollow nanostructure shows a superior catalytic activity (99.9%, 40 min) compared to C support (56%, 60 min). Furthermore, the recycling of MoO₂@C catalyst shows a dramatic decrease even after the first run, while, SiC support exhibit higher stability during the stronger interaction between molybdenum catalyst and SiC support.